Remotec Z-URC550 V1 - Manual (Page 39)

39
Restore Factory Settings
1 Press and hold "CH+" and "VOL-" keys on the remote
simultaneously for 3 seconds until you the indicator lights up and
stays lit.
2 Enter the reset code "9", "9", "9", "9". The indicator light goes out
immediately. All settings are now restored to the factory default
setting.
MAINTENANCE
1
Do not expose your Z-URC
TM
to dust, strong sunlight, humidity,
high temperatures or mechanical shocks.
2 Do not use old and new batteries together as old batteries tend to
leak.
3 Do not use corrosive or abrasive cleansers on your Z-URC
TM
.
4 Keep the unit dust free by wiping it with a soft, dry cloth.
5 Do not disassemble your Z-URC
TM
, it contains no user-serviceable
parts.
FREQUENTLY ASKED QUESTIONS
Z-Wave Frequently Asked Questions
Q Why won’t my Z-URC
TM
work with the Z-Wave devices I
purchased from another country?
A Due to different countries regulations Z-Wave products from
different regions are set to different frequencies. Before purchasing
new devices make sure you have checked that the device is
compatible in your region.
Q Do I need an electrician to install Z-Wave products in my
house?
A Installation can be simple. In some cases all you need to do is
attach the Z-Wave plug in module into the wall socket. For more
advanced in-wall modules you may need this done by a qualified
technician.
Q What kinds of devices can I control with Z-Wave technology?
A While the Z-Wave device range is ever growing you can currently
control your lighting, window shades and electric appliance which
requires on/off switch with the Z-URC
TM
. In addition advanced
models will be able to control additional devices such as
thermostats.
Q What can the Remotec Z-URC
TM
do for me?
A The Z-URC
TM
can control a combination of up to 232 different Z-
Wave devices in 16groups or 16 scenes around your house while