Remotec Z-URC550 V1 - Manual (Page 9)

9
This Remove key is used in the Advance Setup to:
• Remove a device from a group;
• Remove a device from an association group;
• Remove a device from a scene.
Group Control
The Z-URC
TM
550EU enables you to control single or multiple Z-
Wave devices with the press of a button. For example, you can group
all your bedroom lights together so that all of them will turn on with
the press of a button.
You can control up to 16 groups (Group On/Off) with your Z-URC
TM
550EU. Each Group supports up to 32 Z-Wave devices or End-point
(EP) and supports up to 232 Z-Wave devices in a network.
Remark: There are total 16 groups of on/off keys which are shared by
Scene and Group, for example, if you used 6 groups as Group, there
are 10 groups on/off keys left for Scene, and vise versa.
XpressZetup
TM
(Group Setup)
Including Device to a Group
Step Setup Key LED Indication Status
1
Press in
XpressZetup
TM
area
• “OK＂ LED on
• “LED_A＂ flashes
rapidly
2
Select a group number
from 1 to 16 (1-8 or
1-8)
• “LED_A＂ off
• “LED_B＂ flashes
rapidly
3
Press the program button
on the target device
• “OK＂ LED flashes
once then turns off
• “LED_B＂ off
• Group setup completed
Note1: If you cannot add your Z-Wave device, this device might have
been included in another Z-Wave network. In this case, please delete
this device following the steps in the [Deleting Device from the
Network] section then add this device again.