Remotec Z-URC550 V1 - Manual (Page 6)

6
Z-URC
TM
550EU Operations
Welcome to the world of home automation, your Z-URC
TM
550EU will
be able to control all the Z-Wave products around your house. The
following section will guide you through the set up processes for your
Z-URC
TM
550EU. Firstly there is the XpressZetup
TM
for beginner users
that do not have a large amount of Z-Wave products. Following is the
advanced set up that you will need to become familiar with as your Z-
Wave network of products continues to expand.
Please note that all Z-Wave devices, light switches, dimmers, and
shutter switches made from various vendors are compatible with your
Z-URC
TM
550EU as long as they carry the Z-Wave logo:
(Please carefully read through the following then store the manual for
future reference.)
Before using the Z-URC
TM
550EU, please install the batteries:
• 3xAAA batteries are required for operation.
• Remove the battery cover on the back of your Z-URC
TM
550EU.
• Check the polarity of the batteries and the "+/-" marks inside the
battery compartment.
• Insert the batteries.
• Push the battery cover back in place.
L CAUTION (battery safety)
− Use new batteries of the recommended type and size only.
− Never mix used and new batteries together.
− To avoid chemical leaks, remove batteries from the Z-URC
TM
550EU if you do not intend to use the remote for an extended
period of time.
− Dispose of used batteries properly; do not burn or bury them.