Rena Envelope Imager XT 3.0 - Manual (Page 26)

SECTION 3
OPERATING THE PRINTER
Printer Driver Properties
The printer driver describes to the printer how to print your job. It controls the operation of the printer and allows
you to send fixed and variable text and graphics to the printer. The following describes the printer driver properties
windows for the Envelope Imager XT 3.0/ XT 4.0 and how to use them to customize the output of your printer.
To start printing click on File, then Print. The Print window will open. If you wish to print the job click on OK. If
you wish to use the special features built into the printer drivers; then clicking on the Properties button will open the
printer properties window.
If you are using Windows 2000 or Windows XP the window on the right will open.
Clicking on Advanced will open the Options window.
26
Envelope Imager XT3.0/XT4.0 Operations Rev. 6/15/2007