Rena Envelope Imager XT 3.0 - Manual (Page 30)

SECTION 3
OPERATING THE PRINTER
Software Setup Examples
The printer can be used with many different software programs. The following information will provide you with
basic setup details, for some of the most common programs used with our printers.
Printing from FlexMail3
FlexMail3 is a powerful “Envelope Design Program” that has been developed to work seamlessly with your Rena
Systems printer. The following is a brief description of how to setup and print from FlexMail3.
Printer Drivers: You may find newer driver versions on your FlexMail3 CD. However; Rena Systems
suggests using the printer drivers distributed with the printer, or drivers downloaded from
www.renausa.com . These are tested and approved drivers by Rena Systems Inc. Other driver versions may
not work properly. These drivers should not be used with FlexMail 2.
Creating and Exporting Your Data File
Since FlexMail3 does not have a CASS and PAVE option; the data file is normally created with a program that has
CASS and PAVE features.
After your list is cleaned, using your CASS and PAVE software, it must be exported in pre-sort order.
FlexMail3 can link to files with many different data formats; however, the recommended format is a CSV (comma
delimited) format.
Linking Your Data File
1. Open FlexMail3 and make sure you are in the Datasheet view (Select the “Datasheet” tab, located at
bottom of screen.)
2. Click on File, then New
3. Click on Data, then Link Data
4. Browse to locate your data file on the system.
30
Envelope Imager XT3.0/XT4.0 Operations Rev. 6/15/2007