Rena Envelope Imager XT 3.0 - Manual (Page 38)

SECTION 3
OPERATING THE PRINTER
Printing
To make the Printer the default printer for this application click on Print, then select Printing Options... When the
“Printing Options” window opens select the Printers tab and highlight Labels: Non-Presorted Labels or Labels:
Presorted Labels, then click on the Change Printer button. Select the Printer from your printer menu. And click
OK. You are now ready to print the job.
1. If you have not already done this, select Print, Non-presorted Labels, and Template Design and
select the template you created. Click Select
2. Then select Print, Non-Presorted Labels, and Print and click OK. If the printer is not selected,
select it and click OK to print the job.
38
Envelope Imager XT3.0/XT4.0 Operations Rev. 6/15/2007