RGBLink VSP 5360 - Manual (Page 30)

2. Hardware Orientation
VSP 5360 Front Panel
VSP 5360 User Manual 30
VSP 5360 Front Panel
Insert power cord and push power to ON position. OLED module on the front panel will
show RGBlink and go into self verification before it load last setting and send processed
image to the target monitor. For the first setup, CV1 input is default source. With front
panel keyboard, user can operate VSP 5360 through the menus on OLED panel.
亮彩系列
AVDSP SERIES VSP 5360
PROGRAM CV1：NO INPUT
PROGRAM CV2：NO INPUT
OUTPUT FORMAT ：1920X1080X60
IP ADDRESS ：192.168.0.100
Wait Init Device...
Wait Init Device
Finish！