RGBLink VSP 5360 - Manual (Page 66)

5. Communication Software Guideline
Software Operation
VSP 5360 User Manual 66
Device IP
Users can set equipment IP, usually used when one computer control many
devices or remote control. It takes effect immediately after users change IP
through serial port; and when users change IP through network, it takes
effect after reopen the software.
Factory Setup
Click ―Factory Setup‖, previously saved user mode will be cleared.
Language
This software supports both Chinese and English, User can switch the
language by ―Language‖ option.
Admin
Advance Debug： User should input the password in the ―Admin
Password‖ dialog for advance debug.
Note
Advance is only done by engineer. If need,
please connect us for password.