RGBLink VSP 5360 - Manual (Page 83)

6. System Setup and Operation
How to Add or Clear the Layer
VSP 5360 User Manual 83
How to Add or Clear the Layer
Push any button of A, B, C, D in LAYERS area, or push all the 4 buttons,
the button light is on, it means the layer is selected, and add layer finished.
For example, add layer B, push button B, button B light is on, and the
OLED panel shows as follows:
In LAYERS area, push any key of button A, B, C, D that need to clear, the
button light flashes. Push the button again, key light is off, and clear layer
finished.
For example, clear layer B, OLED panel shows as follows:
ON LAYER B
H POS : 0 V POS : 0
H SIZE: 1024 V SIZE: 768
OFF LAYER B