How to realize dsk setting, System setup and operation – RGBLink VSP 5360 User Manual
Page 91
6. System Setup and Operation
How to Realize DSK Setting
VSP 5360 User Manual 91
Before setting the text overlay, please make sure the input channel of the
text. For example, choose DVI3, the operations are as follows:
1. Push the [DVI3] button, and make sure there is input signal, and OLED
shows DVI3 signal.
2. Set the size and position of DVI3: Push the [DVI3] button in PRE area,
the button light is on, and the image can be edited, push the
[Scale/Position] button to set the size.
3. Choose the input signal that will overlay in PRE area.
4. Push the [DSK] button, and open the DSK function.
Turn the knob and choose <PRESET>, push the knob to confirm,
choose the preset mode of DVI3, for example, WhOnBk2, push the
knob to confirm.
—>
DSK ON
SELECT INPUT DVI3
PRESET USER
ALPHA 0
—>H SIZE
1920
V SIZE
1080
H POS
0
V POS
0
—>RESET