RGBLink VSP 5360 - Manual (Page 80)

6. System Setup and Operation
How to Realize Single Image Switching
VSP 5360 User Manual 80
How to Realize Single Image Switching
VSP 5360 can realize seamless effects switch between two channels,
choose the signal in PRE area, then push [CUT] or [TAKE] button, the
signal will be switched to LED display.
For example, switch VGA1 to LED display, first push the [VGA1] button in
PRE area, then push [CUT] or [TAKE] button, and the LED display will
show VGA1 signal.
System default the switch time is 1 seconds for [TAKE] button, if need to
adjust the fade in fade out time, push [MENU] button and enter to the
menu items, turn the knob, choose <SYSTEM>, push the knob to confirm.
Turn the knob, choose <TRANSITION>, and set the fade time, push
[TAKE] button again, the signal will be switched to the LED display with the
adjusted time.
User can also switch the signal by pushing the signal button in PRO area,
but the signal in monitor will not change.