RGBLink VSP 5360 - Manual (Page 84)

6. System Setup and Operation
How to Set the Size and Position of the Image
VSP 5360 User Manual 84
How to Set the Size and Position of the Image
Push the [Scale/Position] button, and enter the scale function menus, the
OLED module show as follows:
The lights of number button 0~9 are on, user can adjust the following items
by knob or number buttons.
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
—>H SIZE 1920
V SIZE
1080
H POS
0
V POS
0
—>RESET