RGBLink VSP 5360 - Manual (Page 72)

5. Communication Software Guideline
How to Connect Windows Control Program by RS232 Interface
VSP 5360 User Manual 72
Check and tap [Serial], Serial Port , for example, is COM6 which is checked
from device manager. Set VSP 5360 Boud Rate to be:115200. Click
<Confirm> after setting.
Click [open serial], check if <COM> icon is on the bottom right
corner，when there is the prompt green showing on
the software, it means the communication is ok , and user can use the
software to control the device now.
Note
If power off during communication, should close
the por t , by first, and plug in out of the USB
and do communication.