RGBLink VSP 5360 - Manual (Page 41)

4. Menu Orientation
MENU
VSP 5360 User Manual 41
<SCREEN PARAMETERS>, user can change the screen through the
digital setting parameters to easily change the screen size and position.
Mainly used in the LED display. Settings as follow:
SCREEN H SIZE: Width setting.
SCREEN V SIZE: Height setting.
SCREEN H POS: Screen horizontal position setting.
SCREEN V POS: Screen vertical position setting.
MODE: User can choose screen size or full size.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
For details, please refer to the instructions in the manual: How to Realize
the Screen Size Setting.
SPLIT
Push the [MENU] button, OLED shows the menu, turn the knob and select
<SPLIT>, push the knob to confirm, there are 2 kinds of split modes, shown
as follows:
SPLIT ON/OFF: User can choose open or shutoff the split function.
HORIZONTAL 1/2: Settings are as follows:
H TOTAL: The total width points of LED display that will split.
V TOTAL: The total height points of LED display that will split.
FIRST WIDTH: The width of the device when do split.
H POS: The horizontal position of the device when do split.
V POS: The vertical position of the device when do split.
VERTICAL 1/2: Settings are as follows:
H TOTAL: The total width points of LED display that will split.
V TOTAL: The total height points of LED display that will split.
FIRST HEIGHT: The height of the device when do split.
H POS: The horizontal position of the device when do split.