RGBLink VSP 5360 - Manual (Page 88)

6. System Setup and Operation
How to Realize the LOGO Capture
VSP 5360 User Manual 88
How to Realize the LOGO Capture
1. Push the [MENU] button and enter to the menu items, turn the knob, and
choose <SYSTEM>, push the knob to confirm, turn the knob, and
choose <LOGO CAPTURE> option, OLED shows as follows:
2. Choose the input source.
3. Freeze image, when capture LOGO, the program image should be
frozen.
4. Set the LOGO horizontal position, vertical position, horizontal size and
vertical size.
5. Save the image to LOGO1 or LOGO2.
6. Start to capture LOGO.
Note
The [LOGO] button can also fulfill this setting.
—> SELECT INPUT LOGO
FREEZE IMAGE OFF
H POS 0
V POS 0
—> H SIZE 1024
V SIZE 768
SAVE TO LOGO 1
START CAPTURE LOGO