RGBLink CP 3096H User Manual - Manual (Page 28)

2. Hardware Orientation
CP 3096H Back Panel
CP 3096H User Manual 28
27. 28: CVBS Output
CVBS can output PAL, NTSC and SECAM, output signal can access to TV,
and the device with CVBS input.
Switch and Power
13. 29: Switch and Power
AC 85-264V 3.8A 50/60Hz IEC-3 Power Interface.
Optional Module
19~21: S. H. D. U. V. C Optional Module
Compatible with SDI, HDMI or DVI optional module. Each SDI optional
module includes 1 3G-SDI input and 1 SDI loop out, each HDMI optional
includes 1 HDMI input, each DVI optional includes 1 DVI-I input, each USB
optional includes 1 USB input, each VGA optional module includes 1 VGA
input (DB15port), and each CVBS optional includes 1 CVBS inputs BNC
port.
3G-SDI Input (S Optional Module): Input video signal from HD camera
and radio processing equipment, connect SDI interface via 75 ohms
impedance BNC port.
SDI Loop Out (S Optional Module): Connect to the SDI input of the next
CP 3096H or the device with SDI input.
HDMI Input (U Optional Module): Input the image signal from computer.
DVI Input (D Optional Module): Input the video signal from computer, DVI
signal generator. Connect to the same DVI interface on CP 3096H.
(This Connection does not support hot-plugging).
USB Input (U Optional Module): Can access the USB device or mobile
hard disk with USB storage function. Support general image and video
formats.