Led display only displays part of the image, Signal needs to scale, No display in the second half part of large screen – RGBLink CP 3096H User Manual User Manual
Page 68: Resolution is insufficient, No display in the second half part of led display
Advertising
CP 3096H User Manual 68
LED Display Only Displays Part of the Image
Signal Needs to Scale
Push the [SCALE] button in the processor and turn the knob to adjust the
actual screen size of the screen, including the "V Size", "H Size" and
"Reset", then push the knob to confirm.
No Display in the Second Half Part of Large Screen
Resolution is Insufficient
Please make sure the points of the screen width and height, choose the
resolution that bigger than screen width by push button [FORMAT], then
push the knob to confirm.
Advertising