RGBLink CP 3096H User Manual - Manual (Page 60)

5. System Setup and Operation
How to Set up the PIP
CP 3096H User Manual 60
How to Set up the PIP
Push the [PIP] button in Effects Operation Area, and enter to the PIP function
menu. Choose the <PIP> option, turn the knob, and choose ON to enable the
PIP function.
LAYOUT: There are 7 kinds of PIP layouts, PIP L+T, PIP R+T, PIP L+B, PIP
R+B, PIP CENT, PBP L+R and PBP T+B. Take 3 results for example, shown as
follows:
PIP L+T PBP L+R PBP T+B
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can
realize the main and sub-picture exchange.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B
individually.
>PIP ON
LAYOUT PIP L+T
SWAP IMAGE OFF
SELECT IMAGE B