RGBLink CP 3096H User Manual - Manual (Page 65)

5. System Setup and Operation
How to Load the Saved Parameter
CP 3096H User Manual 65
How to Load the Saved Parameter
There are two pages and each page has 6 save modes, CP 3096H
provides 12 save modes for load.
1. Push the [LOAD] button, the button light turns on, and PAGE, 1 and 2
button light flash.
2. Set [PAGE], choose 1 or 2, for example, choose 1:
3. Set [BANK], light of button BANK flashes, and button 1 to 6 are on or
flash, the button on is ready for recall and flash means just recall, push
the button on to recall. For example, choose 1:
LOAD FROM
>PAGE: 1
BANK: 1
Push No. 1-2 To Select PAGE!
LOAD FROM
PAGE: 1
>BANK: 1
Push No. 1-6 To Select BANK!
LOAD FROM PAGE 1 BANK 1 Finish!