Teac MD-CD1 - Manual (Page 14)

4 – Features and their functions—Display
14
TASCAM MD-CD1 Owner’s Manual
TAL (OPTICAL) – OUTPUTS – MD terminals].
Even when the power is turned off, the pitch control
ON/OFF setting is retained.
c KEYBOARD connector An IBM PC-
compatible keyboard with PS/2 interface can be con-
nected to this terminal to enable certain operations of
the MD-CD1 with the keyboard. Title input opera-
tions, in particular, can be performed with greater
efficiency.
Display
This display shows various types of operation infor-
mation, including CD and MD disc information,
deck operation modes, and menu status. Disc and
deck information for either CD and MD are shown
by pressing either the CD key or the MD key, and the
deck selected becomes the display master. Also, the
CD Menu key or the MD Menu key can be pressed to
call up the CD Menu or the MD Menu.
d TOC When the most recent TOC (Table of
Contents) data has not been recorded, this lights up
red. During TOC recording, the indicator flashes.
e Track number display During playback
or selection, the track number is displayed.
f MP3 This indicator is lit when and MP3 disc is
in the CD deck.
g MD recording mode display (LP2,
LP4, MONO) This indicates the recording mode of
the MiniDisc. If the disc was recorded in Normal
mode, it does not light up.
h Counter display Depending on the time
display mode, TOTAL or REMAIN are lit. Counter
display indication is in minutes (three digits) and sec-
onds (two digits).
i KEY This lights when the CD deck’s Key
Change function is on.
j PITCH This lights when the display master
deck’s Pitch Control function is on.
k A. CUE This lights when the display master
deck’s Auto Cue function is on.
l A. READY This lights when the display mas-
ter deck’s Auto Ready function is on.
m A. TRACK This lights when the display mas-
ter deck’s Auto Track function is on.
n Meter This displays the playback level or
either the CD or MD deck, as well as the recording
level of the MD deck.
o A-B This lights when the display master deck’s
A-B Repeat function is on.
p REPEAT This lights when the display master
deck’s Repeat function is on.
q SYNC This lights during SYNC recording
mode.
r REC This lights when the MD deck is record-
ing, or in recording standby mode.
s OPTICAL This lights when the MD input
source is set to digital.
t ANALOG This lights when the MD input
source is set to analog.
u SINGLE This lights when the display master
deck is in single playback mode.
v RANDOM This lights when the display mas-
ter deck is in random playback mode.
w PROGRAM This lights when the display
master deck is in program playback mode.
x This lights when the display master deck is
in playback or playback standby mode. Also, when
the Auto Cue function is on, it flashes during Auto
Cue point search.
y This lights when the display master deck is
in recording or playback standby mode.
. / ! @ # $ % ^ & * ( ) Q
W
E
R
T
Y
U
I
O P A S DF G
2ReMD-CD1.fm 14 ページ ２００４年１１月５日 金曜日 午前７時３５分