8 – dubbing from cd to md, Basic dubbing operation, Recording mode setting – Teac MD-CD1 User Manual

Page 34: Dubbing speed setting

Advertising
background image

34

TASCAM MD-CD1

Owner’s Manual

8 – Dubbing from CD to MD

The MD-CD1 makes it easy to dub from CD to MD.
Selected tracks or the entire disc can be dubbed.

Basic dubbing operation

First, load the CD to be used as the dubbing source
into the CD deck, then insert a recordable MiniDisc
into the MD deck.

To dub the entire CD

While the CD deck is stopped, press the DUBBING
key on either the front panel or the remote control.

To dub a selected track on the CD

During playback of the desired track, or when that
track is cued and the deck is in playback standby
mode, press the DUBBING key on either the front
panel or the remote control.

When the track is finished dubbing, both decks will
stop.

NOTE

Dubbing is performed in the preset recording mode
and recording speed. For details, refer to the following.

Recording mode setting

Using the “REC MODE?” option on the REC sub-
menu of the MD menu, select the recording mode
from the following choices.

NOTE

In MONO mode, only the left channel is recorded, and
the recording time is twice that in ST mode.

The recording time in LP2 mode is twice that in ST
mode.

The recording time in LP4 mode is four times that in ST
mode.

The remaining MD recording time indicated depends
upon the recording mode setting.

Recordings made in different recording modes can be
combined on the same disc.

Since a special data compression technology is used for
LP4 mode (quarter-time recording for four times the
recording time in stereo), there is the very slight possi-
bility of spikes of noise being generated. If sound qual-
ity is an important consideration, we do not
recommend the use of the LP4 mode.

Dubbing speed setting

Use the “REC SPEED?” option on the REC sub-
menu of the MD menu to select either “NORMAL”
or “HIGH” speed dubbing.

NORMAL: dubbing is performed during regular
playback

HIGH: dubbing speed depends on the MD recording
mode, as indicated below.

ST:

standard stereo
recording mode

default, with no
display indication

MONO

monaural record-
ing mode

“MONO” lights
up in the display

LP2

half-speed stereo
recording mode

“LP2” lights up in
the display

LP4

quarter-speed ste-
reo recording
mode

“LP4” lights up in
the display

MD recording mode

source
disc

dubbing speed

Standard mode

audio
CD

4X speed

2ReMD-CD1.fm 34 ページ 2004年11月5日 金曜日 午前7時35分

Advertising