Recording cautions, Adding track numbers – Teac MD-CD1 User Manual

Page 37

Advertising
background image

9 – MD recording from an external source—Recording cautions

TASCAM MD-CD1

Owner’s Manual

37

To eject the disc from the deck, press the
EJECT key during stop mode.

NOTE

When “UTOC Writing!” is flashing on the display, data
on the recorded contents is being written onto the disc.

During this process, if the power cord is unplugged
from the power source, or the unit is moved or dis-
turbed, this essential data cannot be correctly recorded
on the disc.

Recording cautions

When “W_Protected!” is displayed

The inserted MD cannot be recorded, or a playback-
only MD was inserted.

Close the write protect tab to enable recording.

Adding track numbers

Track numbers are necessary for editing and cueing
operation. During recording, track numbers are
entered automatically, and may also be entered man-
ually either during or after recording.

Auto track function

This function automatically enters track numbers
during recording.

Set this function using the AUTO TRACK key on the
remote control to select "-**dB", "D-D" or "OFF".

You can also set the auto track function using the
"A_TRK?" option in the REC sub-menu of the MD
menu.

-**dB

If the signal falls below the Auto Track operation
level for more than four seconds, a track number is
automatically entered. To set this operation level, use
the “A_TRK LEVEL?” option on the REC sub-menu
of the MD menu. The level can be set between –30
dB to +72 dB in 6 dB increments.

D-D

When recording from digital sources, track numbers
are added in accordance with the source track num-
bers.

When recording from analog sources, track numbers
are added when the input level drops for four seconds
or more, in the same way as with the “-**dB” setting
above.

NOTE

Even when the power is turned off, the Auto Track and
Auto Track Level settings are retained.

Entering a track number manually

During recording: press the RECORD key at the
point where you wish to begin a new track.

After recording: track numbers can be entered during
editing operation. Refer to “Divide tracks” on page
42.

2ReMD-CD1.fm 37 ページ 2004年11月5日 金曜日 午前7時35分

Advertising