Teac MD-CD1 - Manual (Page 23)

6 – Menu operation—Operation basics
TASCAM MD-CD1 Owner’s Manual
23
Operation basics
1 Select CD Menu or MD Menu
Front panel operation:
Press the CD MENU key or the MD MENU
key to call up the desired menu.
Remote control operation:
Press the MENU key and either the CD
Menu or the MD Menu is called up, depend-
ing upon the position of the CD/MD selector
switch.
The sub-menu screen appears.
NOTE
In Menu mode, the CD or MD indicators flash to indi-
cate which menu is called up.
When a menu is chosen for a deck that is not the dis-
play master, the display master indicator will remain lit,
while the indicator for the menu mode deck will begin
flashing. If the menu for the display master deck is
selected, its indicator will begin flashing.
2 Select the desired sub-menu
Front panel operation:
Use the MULTI JOG dial to select, then press
the ENTER key or the YES key.
Remote control operation:
Use the MENU +/- key to select, then press
the ENT/YES key.
The screen for the selected menu option will
be displayed.
NOTE
To return to the sub-menu selection screen from a
menu option selection screen, press the NO key on
either the front panel or the remote control unit.
3 Select the desired menu option.
Front panel operation:
Use the MULTI JOG dial to select, then press
the ENTER key.
Remote control operation:
Use the MENU +/- key to select, then press
the ENT/YES key.
The setting screen will be displayed.
NOTE
To return to the menu option selection screen, press the
NO key on either the front panel or the remote control
unit. However, if the NO key is pressed for an EDIT
menu option, you will exit the Menu mode.
4 Settings
Front panel operation:
Use the MULTI JOG dial to select, then press
the ENTER key.
Remote control operation:
Use the MENU +/- key to select, then press
the ENT/YES key.
NOTE
Some menu options exist for confirmation purposes
only, and setting cannot be performed.
For MD Editing Menu operation, refer to “MiniDisc
editing” on page 41.
For Title Menu operation, refer to “Title input” on page
45.
5 How to exit Menu mode after setting (or con-
firmation), during menu option display.
Front panel operation:
Press the CD MENU or MD MENU key cor-
responding to the current Menu mode.
Remote control operation:
Press the MENU key.
The CD or MD indicator will stop flashing.
UNDO Undoing an editing operation “MiniDisc editing” 41
TITLE sub-menu (options for MD title editing functions)
TITLE INPUT Input of track or disc title “Title input” 45
TITLE GRP Input of a group title “Group title input” 46
CD PLAY?
PLAY MODE?
Mode>Cont
2ReMD-CD1.fm 23 ページ ２００４年１１月５日 金曜日 午前７時３５分