Teac MD-CD1 - Manual (Page 33)

7 – CD and MD Playback—MD group playback
TASCAM MD-CD1 Owner’s Manual
33
You can also use the “DIR MODE?” option
in the VOL FUNC sub-menu of the CD menu
to turn this mode on or off. 2 During Stop mode, the CD SEARCH key on
the remote control can be used to select a
directory.
Press the CD SEARCH key, and the selected
directory title will be shown on the display.
MD group playback
The MD-CD1 allows MD tracks to be divided into
groups.
When the Group mode is on, only those tracks in the
selected group are available for playback. This is like
playing a disc which only contains the tracks in a
selected group. Accordingly, Program playback and
Repeat playback only function within the group.
Group playback setting
1 Set the remote control master to MD, and
press the DIR/GROUP key.
“GRP ON” or “GRP OFF” will be shown in
the display. When the DIR/GROUP key is
pressed, the current setting is changed. For
example, if the Group playback mode is off,
when the key is pressed, the mode is turned
on and “GRP ON” is displayed.
You can also use the “GRP MODE?” option
in the VOL FUNC sub-menu of the MD
menu to turn this mode on or off.
2 During Stop mode, the MD SEARCH key on
the remote control can be used to select a
group.
Press the MD SEARCH key, and the number
of the selected group will be shown on the
display, followed by the group title.
NOTE
When Group mode is on, regardless of the group, tracks
which are not in the group cannot be played.
When Group mode is turned on, recording is not possi-
ble.
Creating and deleting groups
Using the “EDIT” sub-menu of the MD menu,
groups can be created or deleted. Refer to “Creating
a group” and “Deleting a group” in the “MiniDisc
editing” section starting on page 41.
Titling groups
You can title the groups using the “TITLE” sub-
menu of the MD menu. Refer to “Group title input”
on page 46.
2ReMD-CD1.fm 33 ページ ２００４年１１月５日 金曜日 午前７時３５分