Teac MD-CD1 - Manual (Page 20)

20
TASCAM MD-CD1 Owner’s Manual
5 – Display master and remote control master
The MD-CD1 is equipped with a CD deck and an
MD deck. Since the display and remote control keys
can be used by either deck, this function determines
which deck is represented by their operation. In this
manual, the deck represented by the information in
the display is referred to as the “display master,”
while the deck being operated by the shared keys on
the remote control unit is referred to as the “remote
control master.”
Selecting the remote control master
On the upper part of the remote control, there is a
CD/MD switch used to select the remote control
master. The shared keys on the upper portion of the
remote control unit operate for the deck selected as
the remote control master.
Selecting the display master
The display master can be selected using the CD or
MD keys. The CD or MD indicator lights up to show
the selection.
To switch the display master using the remote con-
trol, set the CD/MD selector to the desired position,
then press the DISPLAY key.
NOTE
When using the shared keys on the remote control unit
for operation, if the remote control master deck and
the display master deck are not the same, the results of
the operation will not be indicated on the display. To
confirm operation results, the remote control master
deck and the display master deck must be the same.
CD/MD selector switch
CD key MD key
CD indicator MD indicator
CD/MD selector switch
DISPLAY key
2ReMD-CD1.fm 20 ページ ２００４年１１月５日 金曜日 午前７時３５分