Teac HS-P82 Quick Start Guide - Manual (Page 13)

Page 13 of 38
Meter Setup
From the MENU button, select Meter Setup. You normally should not need to make adjustments to this
window. The default settings are: Peak Hold 1 sec, Release Time Normal, Over Level –0.20 dB, Ref Level
Line On.
Mixer Setup
From the MENU button, select Mixer Setup.
Start with the Setup tab.
You can assign a name to any track for your convenience. For example, you could rename
Track 1 as “Boom”
Channel Link is for linking a stereo microphone so that one set of controls spans over two input
channels. MS Mic mode is for when you are recording unprocessed mid-side tracks with an M-S
type mic.
The TRIM GROUP tab allows you to link the gain level of any input so that one track controller knob is
master over the group. For most film/video production, you would not use this feature.