Teac HS-P82 Quick Start Guide - Manual (Page 18)

Page 18 of 38
Channel Setup
As described in Part 1, go to the Channel Setup screen in the MENU section. Select the appropriate
parameters for each input channel that you are using, such as Phantom on/off, and so on. At this stage,
you do NOT need to worry about arming the track, nor adjusting the pan and output levels. Those tasks
can be done from the HOME screen later on.
HOME screen
As you might imagine, the HOME screen is where most of your recording activity will take place. The
root HOME screen shows meters for input channels 1-8 as well as the LR master mixdown.