Teac DA-3000 - Manual (Page 16)

16
TASCAM DA-3000
2 – Names and Functions of Parts
Menu operation procedures
This example explains how to set the AUTO MARK function.
1. Press the MENU button to open the
GENERAL menu.
2. Press the MENU button to cycle through the menus.
REC FUNC
menu is open
3. Turn the MULTI JOG dial to the item to set.
AUTO MARK
item selected
4. Press the MULTI JOG dial to open the setting screen.
AUTO MARK
screen open
5. Turn the MULTI JOG dial to change the setting.
6. To change the setting of a different item on the same screen,
press the MULTI JOG dial to move the cursor to the next
setting.
7. Turn the MULTI JOG dial to change the setting.
8. Repeat steps 5–7 as necessary to set other items.
9. Press the MULTI JOG dial to return to the menu. Press the
HOME/DISPLAY button to return to the Home Screen.
NOTE
• Press the EXIT/CANCEL [PEAK CLEAR] button to cancel the
menu operation and return to the menu screen.
• In step 9 above, pressing the MULTI JOG dial reopens the
Home Screen in some cases.