Epson 8200i - Manual (Page 26)

20 Setting Up the Projector
Connecting the Audio Cable
1. If you’ll be using audio, connect one end of the 3.5-mm audio
cable to the Audio port on the projector.
2. Connect the other end of the audio cable to the speaker or
audio out port on the computer’s sound card.
Connecting to a PC Laptop Computer
To connect the projector to your PC laptop computer, you need to:
■ Connect the computer video cable
■ Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the EMP Link V software)
■ Connect the audio cable (if your presentation includes sound)
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
audio cable
Audio port
note
Laptop configurations vary.
See your computer manual
for the location of the ports
needed to connect your
projector.