Epson 8200i - Manual (Page 41)

Setting Up the Projector 35
Connecting to Other Video Sources
You can connect a VCR, camcorder, laser disc player, DVD player,
digital camera, or any other compatible video source to your projector.
The projector supports HDTV, NTSC, PAL, and SECAM video
formats, and automatically detects and identifies the video format.
However, you can specify that a single broadcast format be detected.
(See page 65.) Note that the projector will then be able to detect only
one type of video signal.
The projector can receive composite video, S-Video, or component
video. You can connect the projector to one or more of these video
sources at the same time. If all three are connected, the projector
automatically selects S-Video as the video source.
The type of cable you use depends on whether you have composite
video, S-Video, or component video. For composite video, use the
RCA cables supplied with the projector. For S-Video, use the S-Video
cable supplied with your video device or obtain one from your
computer or video equipment dealer. For component video, use the
BNC-style cable that came with your video source. See the following
illustration if you’re unsure of which type of connectors you have.
Follow the instructions below for your type of connection.
The Computer2/Component Video port and the S-Video port
share the same audio input. So if you have connected a video source to
both interfaces, note that you can use audio from only one of them.
note
The projector is not
compatible with
cable TV-style
F connectors.
4
2
3
1
S-Video
4-pin, mini-DIN component
BNC connector composite
RCA