Epson 8200i - Manual (Page 88)

82 Maintaining and Transporting the Projector
Resetting the Lamp Timer
After you install a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used. Follow
these steps:
1. Press the Help button and hold it down for at least 5 seconds. The
Help menu will be displayed and then you will see a menu asking
if you want to reset the lamp ON time.
2. Use the left arrow button (control panel) or press left on the
Enter button (remote control) to select Yes .
3. Press Enter to reset the timer.
Transporting the Projector
The projector contains many glass parts and precision parts. If you
need to transport it, please follow these packing guidelines to prevent
damaging the projector:
■ When shipping the projector for repairs, use the original
packaging material if possible. If you do not have the original
packaging, use equivalent materials, placing plenty of cushioning
around the projector.
■ When transporting the projector as freight or checked luggage,
first put it in a hard-shell carrying case (such as an optional
EPSON accessory case), then pack it in a firm box, using
cushioning around the case.
■ When you are hand-carrying the projector, be sure to store it in a
carrying case (such as the optional cases offered by EPSON).
note
EPSON shall not be liable
for any damages incurred
during transportation.