Epson 8200i - Manual (Page 28)

22 Setting Up the Projector
Connecting the Mouse and Serial Cables
To use the remote control as a mouse or use the EMP Link V
software, follow the steps below. This illustration shows the
connections you’ll be making:
1. Connect the round end of the main cable to the projector’s
Mouse/Com port, as shown.
2. To use the remote control as a wireless mouse, connect the PS/2
or USB cable included with the projector to the MOUSE terminal
on the square end of the main cable.
3. Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable to
the external mouse port or connect the USB cable to the USB
port on your laptop.
Mouse/Com
port
9-pin serial cable
PS/2 or USB cable
main cable
note
If your laptop uses a serial
mouse, perform steps 2 and 3
using the PC serial mouse
cable instead of the PS/2 or
USB cable.