Epson 8200i - Manual (Page 52)

46 Using the Projector
Adjusting the Height of the Image
You can adjust the height of the image using the lens shift knob on the
side of the projector and the projector’s feet.
Using the Lens Shift Knob
Use the lens shift knob on the side of the projector to raise or lower
the projected image. Press the knob to make it pop out; then turn it
clockwise or counterclockwise to move the lens up or down. When
you’re finished, press the knob back in.
Using the Projector’s Feet
If the image is too low, you can extend the projector’s feet to raise the
lens. Follow these steps:
1. Stand behind the projector and hold up the front while you
squeeze the blue foot release levers against the projector. This
unlocks the feet.
lens shift knob
caution
Do not hold the
projector by the lens; this
can damage it.