EXP Computer C4077-90960 - Manual (Page 144)

Control Panel
1 While pushing in on the side of the printer (Figure 6-2, callout 1) lift up on
the forward edge of the control panel to release the plastic retaining tab .
2 Remove the cable from the retainer and unplug the control panel connector .
To Reinstall:
Plug in the cable, replace the cable in its retainer, insert the rear edge of the
control panel under the top cover lip, and press down on the forward edge to
snap it into place.
Control Panel
Figure 6-2
6
Removal and Replacement
Removal and Replacement 6-17