EXP Computer C4077-90960 - Manual (Page 321)

If the paper path test works, it may be a software or
user related issue. Perform the following steps:
1 Define the media types which are loaded in each paper tray. This can be
done from either JetAdmin or the front control panel of the printer.
From JetAdmin
•
Select the Trays tab.
•
Select the correct media type for each tray listed.
•
Click on OK save your changes and exit JetAdmin.
From Control Panel:
•
Scroll to the TRAY MENU
•
Press the Item button to select a specific tray.
•
Press + until you get to the correct type of media.
•
Press the Select button.
•
Repeat this step for each paper tray
•
Press the ONLINE key
2 From inside your application, choose the page setup option for that
application.
3 Select the paper source / type option.
4 Select the correct media source / type for the first page.
5 Select the correct media source/type for all other pages.
N o t e You must have the 5Si printer selected in your application in order for your
application to provide you with the correct paper tray / media type
selections.
7-84