EXP Computer C4077-90960 - Manual (Page 70)

Testing the Printer
PCL Configuration Page
When you print a PCL Configuration Page, the printer checks its internal
controller and I/O interface, then prints two pages, one showing the overall
printer configuration (see Figure 3-2), and one showing the current menu
settings (see Figure 3-3). You can review these printouts to verify proper
installation of installed accessories, options, and personalities.
1 Press [Menus] until TEST MENU appears.
2 Press [Items] until PCL CONFIGURATION PAGE appears.
3 Press [Select] to print the configuration pages.
Paper Path Test
You can test printer operation with the Paper Path Test in the Test Menu.
It will print 1, 10, 100, or 500 (single or 2-sided) pages from any of the paper
trays (or the Envelope feeder) and deliver them to a previously specified
output bin.
First, select PAPER DESTINATION and 2-SIDED printing (if installed) in the
Configuration Menu (Table 3-9) and then run the Paper Path Test from the
Test Menu (Table 3-8).
3
Operating Overview
Operating Overview 3-25