EXP Computer C4077-90960 - Manual (Page 236)

Hinges
1 Remove the Stapling Unit Assembly (see Figure 6-91).
2 Remove the Top Cover Assembly (see Figure 6-97).
3 Remove the Stapling Bed Assembly (see Figure 6-98).
4 Release the brushes bar from the retaining notches and lift upwards.
5 Remove (2) screws joining each hinge to the housing (see Figure 6-99,
callout 1).
6 Disconnect the (2) cables in the hinge containing cables from the Stapling
Unit Controller PCA (see Figure 6-95, callout 2).
Figure 6-99
6
Removal and Replacement
Removal and Replacement 6-109