EXP Computer C4077-90960 - Manual (Page 298)

Message Error
Log
Category/
Message
Description Recommended
Action
68 NVRAM FULL CHECK
CONFIGURATION Service
Message The non-volatile memory (NVRAM) is full. Press [Select] . The printer will go
offline. Remove MIO card and
perform a COLD RESET. The
printer displays the message
RESTORING FACTORY
SETTINGS. When the
initialization is complete, the
printer will automatically return
online.
70 or 71 ERROR Service
Message A language (personality) SIMM problem was
identified. The SIMM is not compatible with
the firmware. Remove or replace the language
(personality) SIMM.
79 SERVICE (04CC) Catastrophic
System
Message The Main Motor was running for over 20
minutes. See Service Note C3166-08.
See recommended action for
General "79 Service (XXXX)"
messages.
79 SERVICE (0142) Catastrophic
System
Message Duplex job selecting media by source and
odd number of pages. See recommended action for
General "79 Service (XXXX)"
messages.
Table 7-5 Printer Control Panel Messages (continued)
7
Troubleshooting
Troubleshooting 7-61