EXP Computer C4077-90960 - Manual (Page 267)

Message Error
Log
Category/
Message
Description Recommended
Action
OUTPUT OPERATION
CONDITION x.yy Attendance
Required An external output device has a condition
that needs to be corrected before printing
can resume.
x = output device
0 = Paper Handling Controller
2 = Multi-Bin Mailbox
3 = Stapler
yy = condition code
For the Multi-Bin Mailbox: 01 = Face-Up bin
not installed.
Cycle power and print PCL
configuration pages to verify all
devices are shown in printout.
See Figure 7-5.
Check the indicated output device
and correct its condition. Check
C-Link Cables for proper
connection. For the Multi-Bin
Mailbox/Mailbox with Stapler,
ensure that the Face-Up Bin is
properly installed.
PAPER DESTINATION =
ALL BINS Status The printer will output paper to all available
bins. No action required.
PERFORM USER
MAINTENANCE Status The printer requires a formal maintenance
procedure. Perform the required
maintenance in accordance with
chapter 4. Access the
Configuration Menu, and select
SERVICE MESSAGE=OFF.
PRESS SELECT TO
CANCEL JOB Status This message displays to confirm that you
canceled the currently active job. Press [Select] to cancel a print
job. This may take up to 5
minutes to cancel the print job.
Press any other key to continue.
PRINTING
CONFIGURATION PAGE Status This message displays while the printer
prints the configuration pages. No action required.
PRINTING DEMO PAGE Status This message displays while the printer
prints a demo page. No action required.
PRINTING DISK
DIRECTORY Status This message displays while the printer
prints an optional disk accessory directory. No action required.
PRINTING ERROR LOG Status This message displays while the printer
prints the error log. No action required.
PRINTING FONT LIST Status This message displays while the printer
prints a font list. No action required.
PRINTING PAPER PATH
TEST Status This message displays during a paper path
test. This test can print 1, 10, 50, 100, or 500
pages. No action required. To stop the
test, access the JOB CONTROL
menu, and select CANCEL JOB.
PROCESSING JOB FROM
ENV FEEDER Status The printer is processing data from the active
I/O channel. Some data is printed and some
data cannot be printed, such as downloading
fonts or macros. The media source is the
Envelope Feeder. No action required.
Table 7-5 Printer Control Panel Messages (continued)
7-30 Troubleshooting