EXP Computer C4077-90960 - Manual (Page 44)

Operating Environment
The electrical specifications listed in Chapter 1 must be maintained to
ensure proper operation of this printer. Consider the following points before
installing the printer.
•
Install in a well-ventilated, dust-free area.
•
Install on a hard, flat and continuous surface, with all four printer feet
level. Do not install on carpet or other soft surfaces.
•
Ensure adequate power is supplied. Printer power requirements are listed
under “Specifications,” in Chapter 1.
•
Install where there is stable temperature and humidity, away from water
sources, humidifiers, air conditioners, refrigerators, or other major
appliances (see Table 2-1).
•
Install away from direct sunlight, open flames, or ammonia fumes. If the
printer is placed near a window, make sure the window has a curtain or
blind to block any direct sunlight.
•
Install with enough space around the printer for proper access and
ventilation (see Figure 2-1).
•
Install printer away from the direct flow of exhaust from air ventilation
systems.
2
Site Requirements
Site Requirements 2-3