ACTi TCM-6630 - Manual (Page 12)

www.acti.com
TCM-6630 Hardware User’s Manual
12
5) Dome ID Setting
Use the switch to change your speed dome ID by turning the arrow to change each digit to the
desired number. For instance, if the Speed dome ID is 123, the ID switch should be set as below:
NOTE: I f controlling through an ACTi decoder via analog means such as a
keyboard or DVR, no two speed domes should be given the same ID or
communication conflict may occur. When controlled only through Ethernet
and software (without the use of an ACTi hardware decoder), the dome ID
setting may be ignored.