Cruise, Tcm-6630 hardware user’s manual – ACTi TCM-6630 User Manual
Page 43
TCM-6630 Hardware User’s Manual
DIRECTION
The item is for setting the AUTOPAN direction of speed dome camera. The speed will start to
pan clockwise from the start point to the end point if your selection is <RIGHT>, and then
return to the start point. The speed dome will start to pan anti-clockwise from the start point to
the end point if your selection is <LEFT>. Refer to below diagram.
SPEED
The item is for defining the speed dome camera rotation speed while running auto-pan. The
speed is adjustable from 1 to 4; refer to the table below for details.
PAN (degree/sec.)
Speed 1
10
Speed 2
23
Speed 3
35
Speed 4
45
RUN AUTOPAN
After the setting is completed, select this item to manually execute the Auto-pan function.
EXIT
Exit the AUTOPAN setup menu.
CRUISE
A Cruise is a route of manual operations that can be stored and recalled to execute repeatedly. It
can be formed of pan, tilt position.
CRUISE
RECORD START
ENTER
RECORD END
ENTER
RUN CRUISE
ENTER
EXIT
YES