Wdr setting, Tcm-6630 hardware user’s manual – ACTi TCM-6630 User Manual
Page 45
TCM-6630 Hardware User’s Manual
AUTO
The internal circuit will automatically decide the occasion to remove the IR cut filter according
to the image brightness level.
THRESHOLD
The speed dome will remove the filter immediately when the threshold value is reached. The
threshold options are <LOW>, <MID> and <HI>. <LOW> threshold indicates a higher
sensitivity and can improve the reliability of lens.
IR COLOUR
When IR function is enabled, the video output can be programmed as colour or B/W.
ON
Select the item to remove the IR cut filter.
WDR SETTING
The Wide Dynamic Range function is especially effective in solving indoor and outdoor contrast
issues to enhance better image quality and video performance. It enables the speed dome to catch
detailed data from the dark part (Indoor) without any saturation from the bright part (Outdoor). The
parameter of WDR function can be set on this page.
WDR SWITCH
Enable or disable the WDR function with the item.
WDR FUNCTION
The item is used to define the WDR function mode.
NOTE:
The Backlight function will automatically turned off
when the WDR function is enabled, because the WDR
function has better effect than the Backlight compensation.
WDR SETTING
WDR SWITCH
OFF
WDR FUNCTION
AUTO
EXIT
YES