ACTi TCM-6630 - Manual (Page 36)

www.acti.com
TCM-6630 Hardware User’s Manual
36

ANGLE ADJUSTER
The item is for adjusting the camera view angle. The ranges of view angle are changed in
different FLIP mode: the angle ranges from -1
0° to +100° with ME FLIP and FLIP OFF
modes, and from -10° ~ +190° with IMAGE FLIP mode. With IMAGE FLIP function,
users are able to adjust the view angle from -10° ~ +190° to catch the true horizontal
line.

STABILIZER (36x Model Only)
With the Image Stabilizer Function, the speed Dome Camera can capture images that would
otherwise be blurred due to the vibration. The built-in electronic compensation filters out the
vibrations of up to 80% movement at 10Hz, as caused by wind and other environmental
conditions. Its various detection mode ensures total detection for all types of environment. If
the function is activated, users could select the frequency range of either 10Hz or 5Hz.

RESET
Select this item to reset all the camera parameters of SETUP MENUs to the factory dfault.

EXIT
Exit the SETUP MENU1 and go back to MAN MENU.
TITLE DISPLAY
Users are allowed to name a certain view area and display its title for easy recognition. At this item,
users can choose to display or not to display the titles set in advance.

ON
A title set for certain view will be displayed when the dome back to the view area.

OFF
When the TITLE DISPLAY is set <OFF>, no title will be displayed on the screen even titles are
set in advance.
TITLE SETTING
Up to 16 zone titles can be set with maximum 20 characters for each title; two mask zones are
allowed to set in a view area. Users can name the zone titles with privacy mask ID numbers for
future recognition.
ANGLE ADJUSTER
ADJUST MIN ANGLE -10 DEG
ADJUST M
AX ANGLE 100 DEG
EXIT+SET YES