Home setting, Tcm-6630 hardware user’s manual – ACTi TCM-6630 User Manual
Page 39
TCM-6630 Hardware User’s Manual
The Cruise line can be defined in CRUISE setup menu.
DWELL TIME
The DWELL TIME is the duration of executing ALARM ACTION: Preset or Sequence. When
alarm takes place, the dome will go to the preset position or execute sequence function and
stay at each sequence point for a period of time (1~127 seconds). If select <Always>, the
dome will go to the preset position and stay there until alarm condition is released or users
rotate the dome.
EXIT
Exit the ALARM SETTING menu.
HOME SETTING
Users are able to set an operation mode to ensure constant monitoring; if the dome idles for a
period of time, the pre-set function will be activated automatically, this is the HOME function. HOME
function allows constant and accurate monitoring, to avoid the speed dome stops or missing
events.
HOME FUNCTION
The item is used to enable or disable the HOME function.
SELECT MODE
Select one of the modes that the dome should execute when HOME function is enabled and
the RETURN TIME is up. The options are <AUTOPAN>, <SEQUENCE>, <CRUISE> and
<PRESET>.
NOTE:
The DWELL TIME is only accessible when selecting
ALARM ACTION: Preset or Sequence.
HOME SETTING
HOME FUNCTION
OFF
SELECT MODE
PRESET
PRESET POINT
001
RETURN TIME
001
GO
ENTER
EXIT
YES