ACTi TCM-6630 - Manual (Page 47)

www.acti.com
TCM-6630 Hardware User’s Manual
47

SET MASK
After pressing <ENTER> on this item, speed dome will memorize this position as privacy
mask position, up to 8 masks can be set. The model restricts the mask zones to be set too
close with each other.
H CENTER(000 ~ 256)
The original center of mask zone is the center of screen. User can move the center of mask
zone to another position through adjust this value.
V CENTER(000 ~ 256)
The original center of mask zone is the center of screen. User can move the center of mask
zone to another position through adjust this value.
H SIZE(000 ~ 127)
User can adjust the horizontal size of privacy mask through this item. Set the H and V size to
0 can also delete the selected mask.
V SIZE(000 ~ 127)
User can adjust the vertical size of privacy mask through this item. Set the H and V size to 0
can also delete the selected mask.

MASK CLEAR+RESET
The item is used to clear the mask settings of the selected privacy mask. Select a mask and
press <ENTER> to erase its configuration.

MASK DISPLAY
This item is used to set the occasion to display privacy mask.
FIRST
If select this mode, the camera will detect the mask zone of the next preset position and
display the mask in advance, then pan the speed dome to the preset point.
MASK01 MENU
H CENTER 000
V CENTER 000
H SIZE 000
V SIZE 000
EXIT+SAVE YES