ACTi TCM-6630 - Manual (Page 40)

www.acti.com
TCM-6630 Hardware User’s Manual
40

PRESET
Select a preset point where the speed dome should go when alarm pin is triggered.
SEQUENCE
Select a sequence line that the speed dome camer should execute when alarm pin is triggered.
The Sequence line should be defined prior in SEQENCE setup menu.
AUTOPAN
Select an auto-pan line that the speed dome camera should execute when alarm pin is
triggered. The Auto-pan line can be defined in setup AUTOPAN setup menu.
CRUISE
Select a cruise line that the speed dome camera should execute when alarm pin is triggered.
The Cruise line can be defined in CRUISE setup menu.

RETURN TIME
The speed dome starts to count down RETURN TIME when the dome idles, and will execute
the SELECT MODE function if the return time is up. The RETURN TIME ranges from 1 to 128
minutes.

GO
If HOME function is enabled, the users are allowed to execute HOME function manually by
selecting this item.

EXIT
Exit the HOME SETTING menu.
SEQENCE
The function executes pre-positioning of the pan, tilt, zoom and focus features in a certain
sequence for a camera. Before set up this function, users must setup at least two preset points.
SEQUENCE
SEQUENCE LINE 1
SEQUENCE POINT 01
PRESET POSITION 001
SPEED 1
DWELL TIME 001
RUN SEQUENCE ENTER
EXIT YES