Tcm-6630 hardware user’s manual – ACTi TCM-6630 User Manual
Page 50
TCM-6630 Hardware User’s Manual
•Audio
Compression
8 kHz, Mono, PCM, 16 bit encoding
Audio-In
3.5 mm Phone Jack
Audio-Out
3.5 mm Phone Jack
•Network
Protocol & Service
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS,
NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP
Security
IP address filtering; HTTPS encryption; Password protected user levels; IEEE
•Alarm
Alarm Trigger
Video motion detection (3 regions); External device through digital input
Alarm Response
Notify control center; Go to PTZ preset point or preset tour; Change camera
settings; Command other devices; E-mail notification with snapshots;
Upload video, snapshot to FTP server; Activate external device through digital
•Interface
Analog Video Output
1, CVBS, 1.0Vp-p with 75 Ω BNC connector
Digital Input
8, terminal block
Digital Output
1, terminal block
•General
Power Source /
Consumption
AC 24V / 65 W (heater on)
Weight
5800 g (12.9 lb)
Dimensions (Ø x H)
172 mm x 302.5 mm (6.7” x 11.9”); 190 mm x 302.5 mm (7.5” x 11.9”) with
Environmental Casing
Weatherproof (IP66 rated); Transparent dome cover
Mount Type
Pendant, Wall, Corner, Pole
Operating Temperature
-45 °C ~ 50 °C (-49 °F ~ 122 °F)
Operating Humidity
10% ~ 85% RH
Approvals
Camera: CE, FCC, IP66; Adapter: CE, TUV-GS, UL, RCM, CCC
•Integration
Unified Solution
Fully compatible with ACTi software
ISV Integration
Software Development Kit (SDK) available
Firmware Access Browser
Microsoft Internet Explorer 6.0 or newer