Alarm setting, Tcm-6630 hardware user’s manual – ACTi TCM-6630 User Manual
Page 37
![background image](/files/810699/content/doc037.png)
TCM-6630 Hardware User’s Manual
Follow the steps to set a camera title.
(1) Operate speed dome to certain view area where you want to set a title for it.
(2) Turn on OSD and select <TITLE SETTING>.
(3) Select a number to indicate the view area.
(4) Press <ENTER> to go into editing mode.
TITLE SETTING: 01
0
1
2
3
4
5
6
7
8
9
EXIT
A B C D E F G H I
J
SAVE
K L
M N O P Q R S T
LEFT
U V W X Y Z :
/
.
,
RIGHT
[
]
+
?
-
DELETE
TITLE:
ABC
(5) Choose a character with direction keys and then press <ENTER> to input.
Example: <A> <ENTER>, <B> <ENTER>, <C> <ENTER>
TITLE: ABC
(6) To delete entered characters, move the cursor to <LEFT> or <RIGHT> and press <ENTER> to
select a character in entry field, then move the cursor to <DELETE> and press <ENTER> to
delete the selected character.
(7) When the setting is completed, move the cursor to <SAVE> and press <ENTER> to save.
ALARM SETTING
The integrated high speed dome provides eight alarm inputs and two alarm outputs (N.O. and N.C.)
to connect alarm devices. With this function, dome will cooperates with alarm system to catch the
event images. For wiring, please refer to the installation guide and/or qualified service personnel.
Alarm parameters can be set on this page.
NOTE:
For TCM-6630, the available area for setting privacy
mask is restricted within tilt angle 4
5°.
ALARM SETTING
ALARM PIN
1
ALARM SWITCH
OFF
ALARM TYPE
N.C.
ALARM ACTION
PRESET
PRESET POINT
001
DWELL TIME
ALWAY
EXIT
YES