Amer Networks WS6028 Web GUI - Manual (Page 10)

Basic Management Configuration Chapter 1 Web Management
1-3
(2) Select “Internet Protocol (TCP/IP)”, and then click the <Properties> button to enter the
“Internet Protocol (TCP/IP) Properties” window. Select the “Use the following IP address”
button, input the IP address (between 192.168.1.2~192.168.1.254) and the subnet mask
(255.255.255.0), then click the <OK> button to finish the operation.
Fig 1-4 Internet Protocol (TCP/IP）Properties
Step 3: Use the PING command to ensure the connection status between PC and
AC.Click the <Start> button and select <Run>, as shown in Fig 1-5 .
Fig 1-5 Run dialog box